Carbon Steel Flanges

Product Details:

We have been offering a wide range of Plate Flanges to our clients. These are special types of flanges that have raised face and back ups, which are made from quality mill plates. Our flanges have high weld ability & harden ability and are available in different dimensional specifications depending upon the requirements and their applications.

Features:

• High performance
• Reasonable price
• Better-quality range

Advantages

Stainless steel plate flanges are produced from quality mill plate. Mill plate produced to the ASTM A240 and ASME SA240 standards is virtually free of voids, non-metallic inclusions and other defects. The inherent corrosion resistance of stainless steel is enhanced by the superior grain structure offered by plate products over forged or cast//c// products.

As companies begin to look at life-cycle costing models, in almost every case, the slightly higher initial cost of stainless steel plate flanges is more than offset by the extended service life and the reduction of the normal maintenance costs.
Stainless steel plate flanges are a widely accepted alternative to cast or forged flanges in low pressure applications.

Product Details:

Our range of Threaded Flanges finds applications in various industries. These are special type of pipe flanges that can be attached to the pipe without welding. The threads are tapered in order to create a seal between the threaded flange and the pipe as the tapers approach the same diameter. Sometimes a seal weld is also used together with the threaded connection. They are available in various sizes and materials.

Our range of Flanges are made using high grade material, such as Stainless Steel, Alloy Steel, Carbon Steel, Cast Iron, Steel, Aluminum, Brass, Bronze, Monel, PVC and Thermoplastic.

Uses of threaded flanges:

• Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
• They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
• They are ideal for small diameter piping applications.
• They are economical and time saving devices.
• These threaded flanges are normally designed for non-cyclic applications.
• The flanges are suitable to be used in applications where welding is hazardous.
• They can be used in highly explosive areas.

Specifications:

Product Details:

We are a trusted manufacturer of a wide range of Screwed Flanges. These are available in stainless steel, carbon steel and nickel alloy flanges by using the method, such as forging and casting. Available in various specifications, our range can also be customized as per the requirements of our clients.

Features:

• One size fits all pipe schedules.
• Fabricators can more easily cut pipe to length for slip-on flanges.
• The smaller thickness of this flange allows for easier alignment of bolting holes.
• They are generally not preferred for high pressure temperature environments.

Specifications:

• Stainless Steel : ASTM A 182, A 240
• Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
• Carbon Steel : ASTM A 105, ASTM A 181
• Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
• Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
• Copper Alloys : Copper, Brass & Gunmetal
• Size: 1/8" NB TO 48"NB.
• Class: 150#, 300#, 400 #, 600#, 900#, 1500# & 2500 #.

Product Details:

Our organization is engaged in manufacturing of a wide range of Blind Flanges that is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. These flanges are available in various sizes and material and are used to provide positive closer on the ends of pipes, valves or equipment nozzles. Our range helps in easy access to a line once it has been sealed. Further, these are machined to accept a nominal sized pipe to which reduction is being made. This reduction can be a threaded reduction or welded reduction.

Materials used:

• Stainless Steel
• Nickel Alloy
• Titanium
• Carbon Steel
• Cast Iron
• Brass
• Bronze
• Steel
• Aluminum
• Polypropylene
• Silicone
• PVC

Features

• Blind flanges are sometimes supplied with NPT fittings which allow pressure test connections to be fitted.
• They are used to blank off the ends of pipe.
• They are also used to blank off the ends of valves and pressure vessel opening.
• Considering factors like internal pressure and bolt loading, blind flanges, especially in the larger sizes, are the most highly stressed of all types of flanges.
• Since the maximum stresses in a blind flange are bending stresses at the center, they can safely be allowed to be higher than in other types of flanges.
• Blind flanges are made to fit standard pipes in all sizes.

Specifications:

• Stainless Steel : ASTM A 182, A 240
  Grade : F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super
• Duplex stainless steel UNS S32750
• Carbon Steel : ASTM A 105, ASTM A 181
• Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
• Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825,
• Hastelloy C22,C276
• Copper Alloys : Copper, Brass & Gunmetal
• Size: 1/8" NB TO 48"NB.
• Class: 150#, 300#, 400 #, 600#, 900#, 1500# & 2500 #.
  
  

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10

• Dimensional accuracy
• Corrosion resistance
• High strength
• Durable
• Fine finish

• Type: Lapped Plate Type Flange
• Material: Carbon Steel IS 2062, IS 2002, ASTM A515 GR. 60/70
• Dimension: ASME-ANSI B16.5, ASME-ANSI B16.47, AWWA C207, BS 1560, IS 13159, BS 3293, BS 4504
• Size Range: 15NB to 1200NB
• Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
• Carbon Steel : ASTM A 105, ASTM A 181
• Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825,
• Hastelloy  : C22,C276
• Copper Alloys : Copper, Brass & Gunmetal
• Size : 1/8" NB TO 48"NB
• Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• B.S : BS4504 , BS4504, BS1560, BS10
• DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

Product Details:

Our clients can avail from us a wide range of DIN - Deutsches Institute Normung (German Institute for Standardization) Flanges. These can be availed in different material specifications including carbon steel, stainless steel and alloy steel. Our range is available at the most reasonable prices and can work efficiently under high temperature and pressure.

Features:

• Global Standards and Norms
• Dimensional Accuracy
• Quality with performance

Specifications:

Simon Steel (India) range of Spectacle Flanges is fabricated using optimum quality stainless steel & alloys. Spectable Flanges are available in various technical specifications and in forms like Slip On, Socket Weld, Blind, Lapped, Screwed, Weld Neck, Reducing, Spectacle, Slip On Boss, Plate, Plate Blank, Screwed Boss etc. Moreover, we also customize our range as per the specifications provided by our clients.

Features:

• High durability
• Resistant to corrosion
• Impeccable strength

• 15 NB up to 600 NB in 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, Table 6, Table 10, Table 16, Table 25, Table 40, Table 64, Table 160, Table 320, Table 400